落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高线电压小电流大小可靠性试验报告仪(耐弧光可靠性试验报告仪)-(算出机操作)

High voltage low current tester (arc resistance tester) - (computer control)

服务种类:耐电弧试验机

Product name: electric arc resistance tester

的产品材质:NDH-A

Product model: NDH - A

实现准则:GB/T 1411-2002《气体绝缘电阻材料耐高偏低瞬时电流电弧焊接充放电的做实验的时候》(就是指IEC  61621-1997)及ASTM D495等规定的不符合要求开发制造出的,并不符合IEC 149、UL 746A等实验室检测具体方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要实用区域及系统:

本试验检测机是通过采代替电机马达、电商和家里用的电商等行业内的焊工用塑、硅橡胶胶和接地带层漆等接地带层文件的耐焊弧稳定性评估,主代替液态接地带层文件如:塑、保护膜、硅橡胶、白云母、陶瓷图片、钢化玻璃、接地带层油、接地带层漆、厚纸板等媒介的耐焊弧稳定性测试测试;

本可靠性试验箱由计算出机管理正常运作,也可以展现如今调查模式及调查耗时,调查完结后并维持如今调查信息,并可打印文件.标淮进行实验报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为内外成一体结构类型,中下部为进行整体,上侧为检测箱。

2 本食品应用*新自动化控制技木,可以通过选取程序流程图(IEC或ASTM)可手动做出实验,并在PC上界面显示应力测试工作和最终结果。

3 **效果较好,抗电磁波辐射意识强,各种测试精度等级高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断耗时测量误差:小于等于 ±10ms

2 调压器发热量:2kVA

3 稳定耐压电流:12.5kV

4 耐压输出功率精确:±3%

5 直流电压掌控精准度:±10%  电流值校正gps精度:1.5%

6 电极材料对试板负荷:(0.5±0.05)N

7 工业文件:钨棒

8 电级距離:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 安全使用周围环境的温度:(23±2)℃

10 便用周围环境温度:(50±5)%

11 开关电源:220V±5%  50Hz  10A

12 试验装置    方案:   标准/美标/10 mA 连着/20 mA 间隔/30 mA累计/40 mA不间断

13 试验检测系统程序下面的:

系统段

电孤电压电流

mA

电孤通断时间间隔s

各源程序段持续保持时长s

试验台总期限s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

累计通

60

240

5

20

维持通

60

300

6

30

连着通

60

360

7

40

不间断通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

号码

种类

次数

备注名称

01

耐焊弧测试测试仪器

每台

 

02

电极片控制系统

五套

 

03

电极片支承

买套

 

04

外接电源电力电缆

五套

 

05

接地线放**

一批

 

06

电流值毫安表

两台

 

07

我的电脑测控手机app

一项

 

08

试板架

1支

 

09

电极材料离条件块

2块

 

10

偏角标准单位块

2块

 

11

瓷质片

2片

 

12

喷墨缩印机

1台

品牌形象

13

折算机

1台

品脾

14

食用反映书

1份

 

15

出厂合格证证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 產品产品编号:

NDH-A    耐脉冲检验仪-微机把控好

NDH-B    耐电弧焊接试验报告仪-触摸式屏把控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪